CATIA

STL parts created as solids should be fine. If the part was created as volumes from surfaces, it may create problems. We recommend using the CATIA toolbox to analyze all STL's once they have been generated.

  1. Select STL Command
  2. Maximum Sag = .0003" or .0125 mm
  3. Select part(s) to be converted and Click YES
  4. Type filename and output the STL
  5. Save

For additional questions refer to your manual, MIS department or the Maker of the software: CATIA

Select your CAD program in the pulldown menu to view the recommended settings for exporting an STL file